Epoxy based zinc rich primer for fire protection coating for structural steel.Toprotect steel against corrosion&prepare the surface.
FlameGuard SSP - Base Coat
During f ire when the structural steel temperature approaches 538°C it lose 60% of its yield strength andmay lead to the building collapse. FlameGuard SSP Base Coat – coated to desired thickness prevents steel structures from crossing the critical temperature of 538°C, thus delaying the collapse of loaded steel structures for up to 2 hours and providing time for evacuation & fire fighting. The smooth fibre free robust decorative surface allows the architect to use the structural steel work as an integral part of the building design. Rapid installation with typically DFT's below2mm, appearance of the structure is preserved without affecting the load bearing calculations. Incase of fire, the film expands tomany times its original film thickness.This provides an insulating foam-like coating or char toprotect steelwork againstheat build-upandthe effects of fire.
FlameGuard SSP - Top Coat
Thin film high solids intumescent coating provide maximum protection & enables a high quality finish to be obtained similar to conventional decorative paints.Ahard decorative self-extinguishing, fast drying finish to seal the basecoat & provide an attractive high quality finish. Recommended as a top coat over FlameGuard SSP Base Coat for optical reasons and moisture protection. The coating facilitates as sealer function to prevent early degradationandinactivation of intumescent layer.Available in variousRALshades. Coverage: 21 Sq.m/ 4 kgs / @ DFT 125 microns